| Double Cone Blender (Capacity 50 to 500 litre and above) |
The Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously for Pharmaceutical, Food, Chemical and Cosmetic products etc.
Salient Features
- General structure made out of SS304 and Polished to the matt / mirror finish (as required by customer) in GMP Model.
- The conical shape at both ends enables uniform mixing and easy discharge.
- Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.
- All contact parts are made out of stainless 304. SS 316 quality material (as required by customer).
- As per customer requirement machine will be provided with left side drive or with right side drive.
- All moving parts covered with SS304 covers. Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
- Manual rotating facility with hand wheel for inching. The same will be provided with SS cover & limit switch. ( In 200 Kg & above model )
- Maximum care has been taken to ensure safe operation of the unit.
- Two nos. of safety rod will be provided at back side. ( One LH side & one RH side )
- Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with open able cover provided at other end of the cone for material charging & cleaning.
- One shaft with 04 nos. of fixed baffles with mirror polished provided inside the cone.
- Cone will be mirror polished from the inside & outside & structure will be matt polished.
- Panel fabricated from SS304 material with facility of three phase indication, D.O.L. starter, digital timer & Amp. Meter.
- The conical shape at both ends enables uniform mixing and easy discharge.
- Inside & outside of the cone will be polished to the mirror finished.
- Hand wheel will be provided for manual tilting of cone.
| Double Cone Blender R & D MODEL (Capacity 02 to 25 litre) |
Technical Specification
Gross Capacity in Ltr. : |
02 to 25 Liters |
Working Capacity in Kg. : |
500 Gm. to 10 Kg. |
Drive Motor : |
0.5HP/3ph/TEFC |
Approximate R.P.M. : |
0 to 44 FOR 60 Hz or
0 to 37 FOR 60 Hz |
Material of Construction
Contact Parts : |
SS304/SS316/SS316L |
General Structure : |
Made out of SS304 Material |
Safety Guards : |
SS304 |
Discharging : |
38 to 50 MM Butter Fly valve |
Panel
- Panel made out of SS304
- Three phase Indicating lamp
- Timer and RPM display
